Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Futakawa, Masatoshi
Proceedings of 13th International Symposium on Advanced Science and Technology in Experimental Mechanics (13th ISEM'18) (USB Flash Drive), 6 Pages, 2018/10
Issues on the engineering technologies relating to high-power spallation neutron sources with liquid metals are introduced. The present status on research activities and results was reviewed.
Yamazaki, Dai; Soyama, Kazuhiko; Ebisawa, Toru*; Takeda, Masayasu; Torikai, Naoya*; Tasaki, Seiji*; Matsuoka, Hideki*
Physica B; Condensed Matter, 356(1-4), p.229 - 233, 2005/02
Times Cited Count：1 Percentile：6.21(Physics, Condensed Matter)The application of neutron reflectometry to study dynamic phenomena at surface and interfaces have been restricted so far. It was mainly due to the low intensity of neutron sources, but now high-intensity spallation neutron sources are under construction in Japan (J-PARC) and U.S. (SNS). We have a plan to install a spin-echo option on the J-PARC neutron reflectometer with horizontal sample geometry for studies on dynamics of surfaces and interfaces. This option is based on the resonance spin-echo method and aimed at dynamics upto hundreds of nanoseconds. In this contribution, the plan and status of development are introduced together with the principle and characteristics of this option.
Li, J.-F.*; Kawai, Masayoshi*; Kikuchi, Kenji; Igarashi, Tadashi*; Kurishita, Hiroaki*; Watanabe, Ryuzo*; Kawasaki, Akira*
Journal of Nuclear Materials, 321(2-3), p.129 - 134, 2003/09
Times Cited Count：14 Percentile：66.87(Materials Science, Multidisciplinary)For the development of tantalum-clad tungsten targets for spallation neutron sources, the bonding strength of tantalum-tungsten interface was investigated by means of an easy-to-use and miniaturized small punch (SP) test, in which a punching load is vertically applied to the center of a jointed disk. Cracks initiated and propagated in the tungsten side for all the samples hot-isostatically pressed (HIPed) at temperatures from 1673 to 2073 K, whereas nocrack and debonding were observed in the interface, indicating that the jointed interface is strongly bonded. The re-crystallization of tungsten occurs and results in its strength reduction, consequently the crack-initiating load decreases with HIPing temperature. The finite element analysis of the measured SP testing results shows that the maximum bonding strength can exceed 1000 MPa. The present study shows that SP test is suitable for the strength evaluation of jointed tantalum-tungsten interfaces.
